easyRESCUE Dive-Pro 2nd Gen

Description

Each diver has certainly wondered what happens if he gets separated from his “Buddy” or dive group and in addition has no orientation where the dive boat is.

The easyRESCUE Dive-Pro 2nd Gen can be worn on the vest during the dive. Don’t panic, it is water-resistant to more than 100 meters!

The unit is developed out of the AIS S.A.R.T. emergency beacon easyRESCUE-DIVE for safari boats as well as diving bases. The unit of each diving member will be activated before diving and handed out with a specific briefing on “how to use.” A persistent position report will be sent by every unit via VHF radio on a proprietary frequency received by the diving boat or diving center. By means of this position report the diving group could be tracked on the water surface and to be considered “insight”.

If the group appears out of sight of the diving boat, the diving master takes out his transmitter, unfolds the antenna and lift up the unit as high as possible. The diving boat will get the current position to drive by and pick up the whole group.

Emergency Activation

If the diver were to emerge on the waters surface and the dive boat/group is not insight. The diver would take out his easyRESCUE Dive-Pro 2nd Gen, unfold the antenna, push the slider down, and press the “ALERT” button. Via AIS technology the dive boat receives detailed information regarding the exact GPS position of the diver along with his/her Course Over Ground (COG) and Speed Over Ground (SOG) if he/she is in a current. This information is updated every minute.

The data within this emergency telegram will be received by every AIS equipped vessel in the surrounding area of the victim. Radiation range depends on the height of the receiving antenna, range of up to 10 nautical miles or more is possible.

*The DivePro is  fully rechargeable*